Highlander 120 AirTrek
The Highlander 120 AirTrek PDL is a SUP-kayak hybrid with more room, better tracking, and rock-solid stability. Pedal-drive ready, with clean rigging, quick setup, and portability for bigger water.
| Imperial | Metric | |
|---|---|---|
| Length | 12 ft | 3.66 m |
| Width | 39 in | 99 cm |
| Hull weight | 34 lb | 15 kg |
| Rigged weight | 41 lb | 19 kg |
| Weight capacity | 450 lb | 204 kg |
Where it performs
Rated out of 100 for each condition.
How it handles
Rated out of 100.
At a glance
- Propulsion
- Paddle, Pedal, Motor
- Cockpit
- Sit-on
- Seats
- Single
- Construction
- Welded Drop-Stitch PVC
Features
- Inflatable SUP-kayak hybrid for compact performance
- Compatible with Traverse or fin pedal drives
- Ultra-stable platform for stand-up fishing or paddling
- Equipped with ultra-comfortable high-low Treklite seat
- 4-piece paddle converts between SUP and kayak use
- x4 integrated gear tracks for rigging accessories
- x3 stern anchor pole, rudder or motor mounts
- Packs into travel bag with roller wheels
Specific to the Highlander 120 AirTrek
Answers that are only true of this one.
Shared across the Highlander AirTrek inflatables
Anatomy of the Highlander AirTrek seriesThis article names every part on the deck of the Highlander 100, 120, and 140T — plus per-model dimensions — so you know what to attach where when rigging accessories or troubleshooting.Highlander AirTrek user manualThe complete Highlander AirTrek PDL Series manual (100, 120, 140T) — operating pressure 10–12 psi (over 12 voids the warranty, never use an air compressor), plus pod/drive/fin/seat install, deflation and pack-down, patch repair, care, and the 2-year inflatable warranty.Highlander first-day checklistInflate to 10–12 psi with a real gauge, install the Traverse or fin drive, set the perch, and ease into your first paddle — then pack down rolled (not folded) and never stored wet at pressure.Highlander inflation, packing and pressureInflate to 10-12 psi to operate, keep it at 10 psi or less in storage, never exceed 12 psi (voids warranty), and use a real gauge.Highlander inflatables: single-chamber designAll Highlanders — the 100, 120, and 140T — are single-chamber inflatables. One chamber, simpler valve count, fewer points of failure on the water.Highlander pedal drive minimum height4'6" is the minimum comfortable height for pedaling the Highlander AirTrek.
Parts and accessories that fit it
Each opens the guides for that part.